Multi-pair, Vinyl Insulated/Vinyl Sheathed, Shielded Extension and Compensating Cables for Thermocouples
| Nominal cross-sectional area | Type | Cross Section | Conductor | Insulation | Pair | Twisted multi pairs | Shield | Sheath | Standard | Max length | Estimated weight | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Composition | Outside diameter | Thickness | Outside diameter | Outside diameter | Outside diameter | Thickness | Thickness | Outside diameter | |||||
| mm2 | Pcs/mm | mm | mm | mm | mm | mm | mm | mm | mm | m | kg/km | ||
| 0.3 | 12/0.18 x2P □-G-◇-IS=VVT |
1 | 12/0.18 | 0.7 | 0.4 | 1.5 | Note | Note 3.6 | 0.3 | 0.7 | 5.8 | 1,000 | 61 |
| 0.3 | 12/0.18 x3P □-G-◇-IS=VVR |
2 | 12/0.18 | 0.7 | 0.4 | 1.5 | 3.0 | 5.4 | 0.3 | 0.8 | 7.8 | 1,000 | 83 |
| 0.3 | 12/0.18 x4P □-G-◇-IS=VVR |
3 | 12/0.18 | 0.7 | 0.4 | 1.5 | 3.0 | 6.2 | 0.3 | 1.0 | 9.0 | 1,000 | 110 |
| 0.3 | 12/0.18 x5P □-G-◇-IS=VVR |
4 | 12/0.18 | 0.7 | 0.4 | 1.5 | 3.0 | 6.9 | 0.3 | 1.0 | 9.7 | 1,000 | 125 |
| 0.3 | 12/0.18 x6P □-G-◇-IS=VVR |
5 | 12/0.18 | 0.7 | 0.4 | 1.5 | 3.0 | 7.8 | 0.3 | 1.0 | 10.6 | 1,000 | 145 |
| 0.3 | 12/0.18 x7P □-G-◇-IS=VVT |
6 | 12/0.18 | 0.7 | 0.4 | 1.5 | 3.0 | 7.8 | 0.3 | 1.0 | 10.6 | 1,000 | 157 |
| 0.3 | 12/0.18 x8P □-G-◇-IS=VVR |
7 | 12/0.18 | 0.7 | 0.4 | 1.5 | 3.0 | 9.0 | 0.3 | 1.2 | 12.2 | 1,000 | 190 |
| 0.3 | 12/0.18 x10P □-G-◇-IS=VVT |
8 | 12/0.18 | 0.7 | 0.4 | 1.5 | 3.0 | 9.6 | 0.3 | 1.2 | 12.8 | 1,000 | 220 |
| 0.3 | 12/0.18 x12P □-G-◇-IS=VVT |
9 | 12/0.18 | 0.7 | 0.4 | 1.5 | 3.0 | 10.4 | 0.3 | 1.2 | 13.6 | 1,000 | 246 |
| 0.3 | 12/0.18 x15P □-G-◇-IS=VVT |
10 | 12/0.18 | 0.7 | 0.4 | 1.5 | 3.0 | 11.4 | 0.3 | 1.4 | 15.0 | 1,000 | 301 |
| 0.3 | 12/0.18 x20P □-G-◇-IS=VVR |
11 | 12/0.18 | 0.7 | 0.4 | 1.5 | 3.0 | 13.2 | 0.3 | 1.4 | 16.8 | 1,000 | 380 |
| 0.5 | 7/0.3 x2P □-G-◇-IS=VVT |
1 | 7/0.3 | 0.9 | 0.5 | 1.9 | 注 | 注 4.6 | 0.3 | 0.8 | 7.0 | 1,000 | 85 |
| 0.5 | 7/0.3 x3P □-G-◇-IS=VVR |
2 | 7/0.3 | 0.9 | 0.5 | 1.9 | 3.8 | 6.8 | 0.3 | 1.2 | 10.0 | 1,000 | 130 |
| 0.5 | 7/0.3 x4P □-G-◇-IS=VVR |
3 | 7/0.3 | 0.9 | 0.5 | 1.9 | 3.8 | 7.8 | 0.3 | 1.2 | 11.0 | 1,000 | 155 |
| 0.5 | 7/0.3 x5P □-G-◇-IS=VVR |
4 | 7/0.3 | 0.9 | 0.5 | 1.9 | 3.8 | 8.7 | 0.3 | 1.2 | 11.9 | 1,000 | 180 |
| 0.5 | 7/0.3 x6P □-G-◇-IS=VVR |
5 | 7/0.3 | 0.9 | 0.5 | 1.9 | 3.8 | 9.9 | 0.3 | 1.2 | 13.1 | 1,000 | 205 |
| 0.5 | 7/0.3 x7P □-G-◇-IS=VVT |
6 | 7/0.3 | 0.9 | 0.5 | 1.9 | 3.8 | 9.9 | 0.3 | 1.2 | 13.1 | 1,000 | 220 |
| 0.5 | 7/0.3 x8P □-G-◇-IS=VVR |
7 | 7/0.3 | 0.9 | 0.5 | 1.9 | 3.8 | 11.4 | 0.3 | 1.4 | 15.0 | 1,000 | 270 |
| 0.5 | 7/0.3 x10P □-G-◇-IS=VVT |
8 | 7/0.3 | 0.9 | 0.5 | 1.9 | 3.8 | 12.2 | 0.3 | 1.4 | 15.8 | 1,000 | 315 |
| 0.5 | 7/0.3 x12P □-G-◇-IS=VVT |
9 | 7/0.3 | 0.9 | 0.5 | 1.9 | 3.8 | 13.1 | 0.3 | 1.4 | 16.7 | 1,000 | 350 |
| 0.5 | 7/0.3 x15P □-G-◇-IS=VVT |
10 | 7/0.3 | 0.9 | 0.5 | 1.9 | 3.8 | 14.4 | 0.3 | 1.6 | 18.4 | 1,000 | 440 |
| 0.5 | 7/0.3 x20P □-G-◇-TIS=VVR |
11 | 7/0.3 | 0.9 | 0.5 | 1.9 | 3.8 | 16.7 | 0.1 | 1.6 | 20.9 | 1,000 | 545 |
| 0.75 | 30/0.18 x2P □-G-◇-IS=VVT |
1 | 30/0.18 | 1.2 | 0.5 | 2.2 | 注 | 注 5.3 | 0.3 | 0.8 | 7.7 | 1,000 | 120 |
| 0.75 | 30/0.18 x3P □-G-◇-IS=VVR |
2 | 30/0.18 | 1.2 | 0.5 | 2.2 | 4.4 | 7.9 | 0.3 | 1.2 | 11.1 | 1,000 | 170 |
| 0.75 | 30/0.18 x4P □-G-◇-IS=VVR |
3 | 30/0.18 | 1.2 | 0.5 | 2.2 | 4.4 | 9.0 | 0.3 | 1.2 | 12.2 | 1,000 | 205 |
| 0.75 | 30/0.18 x5P □-G-◇-IS=VVR |
4 | 30/0.18 | 1.2 | 0.5 | 2.2 | 4.4 | 10.1 | 0.3 | 1.4 | 13.7 | 1,000 | 245 |
| 0.75 | 30/0.18 x6P □-G-◇-IS=VVR |
5 | 30/0.18 | 1.2 | 0.5 | 2.2 | 4.4 | 11.4 | 0.3 | 1.4 | 15.0 | 1,000 | 295 |
| 0.75 | 30/0.18 x7P □-G-◇-IS=VVT |
6 | 30/0.18 | 1.2 | 0.5 | 2.2 | 4.4 | 11.4 | 0.3 | 1.4 | 15.0 | 1,000 | 320 |
| 0.75 | 30/0.18 x8P □-G-◇-IS=VVR |
7 | 30/0.18 | 1.2 | 0.5 | 2.2 | 4.4 | 13.2 | 0.3 | 1.4 | 16.8 | 1,000 | 355 |
| 0.75 | 30/0.18 x10P □-G-◇-IS=VVT |
8 | 30/0.18 | 1.2 | 0.5 | 2.2 | 4.4 | 14.1 | 0.3 | 1.6 | 18.1 | 1,000 | 435 |
| 0.75 | 30/0.18 x12P □-G-◇-IS=VVT |
9 | 30/0.18 | 1.2 | 0.5 | 2.2 | 4.4 | 15.2 | 0.3 | 1.6 | 19.2 | 1,000 | 490 |
| 0.75 | 30/0.18 x15P □-G-◇-TIS=VVT |
10 | 30/0.18 | 1.2 | 0.5 | 2.2 | 4.4 | 16.7 | 0.1 | 1.6 | 20.9 | 1,000 | 585 |
| 0.75 | 30/0.18 x20P □-G-◇-TIS=VVR |
11 | 30/0.18 | 1.2 | 0.5 | 2.2 | 4.4 | 19.4 | 0.1 | 1.8 | 24.0 | 1,000 | 710 |
| 公称 断面積 |
記号 | 断面図 | 導体 | 絶縁体 | 対 | 多対撚り | 遮蔽 | シース | 仕上 | 1条の 最大長 |
概算 質量 |
||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 構成 | 外径 | 厚さ | 外径 | 外径 | 外径 | 厚さ | 厚さ | 外径 | |||||
| mm2 | 本/mm | mm | mm | mm | mm | mm | mm | mm | mm | m | kg/km | ||
| 1.25 | 7/0.45 x2P □-G-◇-TIS=VVT |
1 | 7/0.45 | 1.35 | 0.5 | 2.35 | 注 | 注 5.7 | 0.1 | 1.0 | 8.7 | 1,000 | 185 |
| 1.25 | 7/0.45 x3P □-G-◇-TIS=VVR |
2 | 7/0.45 | 1.35 | 0.5 | 2.35 | 4.7 | 8.5 | 0.1 | 1.4 | 12.3 | 1,000 | 220 |
| 1.25 | 7/0.45 x4P □-G-◇-TIS=VVR |
3 | 7/0.45 | 1.35 | 0.5 | 2.35 | 4.7 | 9.6 | 0.1 | 1.4 | 13.4 | 1,000 | 260 |
| 1.25 | 7/0.45 x5P □-G-◇-TIS=VVR |
4 | 7/0.45 | 1.35 | 0.5 | 2.35 | 4.7 | 10.8 | 0.1 | 1.6 | 15.0 | 1,000 | 305 |
| 1.25 | 7/0.45 x6P □-G-◇-TIS=VVR |
5 | 7/0.45 | 1.35 | 0.5 | 2.35 | 4.7 | 12.2 | 0.1 | 1.6 | 16.4 | 1,000 | 345 |
| 1.25 | 7/0.45 x7P □-G-◇-TIS=VVT |
6 | 7/0.45 | 1.35 | 0.5 | 2.35 | 4.7 | 12.2 | 0.1 | 1.6 | 16.4 | 1,000 | 370 |
| 1.25 | 7/0.45 x8P □-G-◇-TIS=VVR |
7 | 7/0.45 | 1.35 | 0.5 | 2.35 | 4.7 | 14.1 | 0.1 | 14.6 | 18.3 | 1,000 | 445 |
| 1.25 | 7/0.45 x10P □-G-◇-TIS=VVT |
8 | 7/0.45 | 1.35 | 0.5 | 2.35 | 4.7 | 15.0 | 0.1 | 1.8 | 19.6 | 1,000 | 530 |
| 1.25 | 7/0.45 x12P □-G-◇-TIS=VVT |
9 | 7/0.45 | 1.35 | 0.5 | 2.35 | 4.7 | 16.2 | 0.1 | 1.8 | 20.8 | 1,000 | 615 |
| 1.25 | 7/0.45 x15P □-G-◇-TIS=VVT |
10 | 7/0.45 | 1.35 | 0.5 | 2.35 | 4.7 | 17.9 | 0.1 | 1.8 | 22.5 | 1,000 | 750 |
| 1.25 | 7/0.45 x20P □-G-◇-TIS=VVR |
11 | 7/0.45 | 1.35 | 0.5 | 2.35 | 4.7 | 20.7 | 0.1 | 2.0 | 25.7 | 1,000 | 975 |
| 1.3 | 4/0.65 x2P □-G-◇-TIS=VVT |
1 | 4/0.65 | 1.57 | 0.6 | 2.77 | 注 | 注 6.7 | 0.1 | 1.0 | 9.7 | 1,000 | 160 |
| 1.3 | 4/0.65 x3P □-G-◇-TIS=VVR |
2 | 4/0.65 | 1.57 | 0.6 | 2.77 | 5.54 | 10.0 | 0.1 | 1.6 | 14.2 | 1,000 | 260 |
| 1.3 | 4/0.65 x4P □-G-◇-TIS=VVR |
3 | 4/0.65 | 1.57 | 0.6 | 2.77 | 5.54 | 11.4 | 0.1 | 1.6 | 15.6 | 1,000 | 310 |
| 1.3 | 4/0.65 x5P □-G-◇-TIS=VVR |
4 | 4/0.65 | 1.57 | 0.6 | 2.77 | 5.54 | 12.7 | 0.1 | 1.6 | 16.9 | 1,000 | 370 |
| 1.3 | 4/0.65 x6P □-G-◇-TIS=VVR |
5 | 4/0.65 | 1.57 | 0.6 | 2.77 | 5.54 | 14.4 | 0.1 | 1.6 | 18.6 | 1,000 | 415 |
| 1.3 | 4/0.65 x7P □-G-◇-TIS=VVT |
6 | 4/0.65 | 1.57 | 0.6 | 2.77 | 5.54 | 14.4 | 0.1 | 1.6 | 18.6 | 1,000 | 450 |
| 1.3 | 4/0.65 x8P □-G-◇-TIS=VVR |
7 | 4/0.65 | 1.57 | 0.6 | 2.77 | 5.54 | 16.6 | 0.1 | 1.8 | 21.2 | 1,000 | 540 |
| 1.3 | 4/0.65 x10P □-G-◇-TIS=VVT |
8 | 4/0.65 | 1.57 | 0.6 | 2.77 | 5.54 | 17.7 | 0.1 | 1.8 | 22.3 | 1,000 | 650 |
| 1.3 | 4/0.65 x12P □-G-◇-TIS=VVT |
9 | 4/0.65 | 1.57 | 0.6 | 2.77 | 5.54 | 19.1 | 0.1 | 1.8 | 23.7 | 1,000 | 730 |
| 1.3 | 4/0.65 x15P □-G-◇-TIS=VVT |
10 | 4/0.65 | 1.57 | 0.6 | 2.77 | 5.54 | 21.1 | 0.1 | 2.0 | 26.1 | 1,000 | 890 |
| 1.3 | 4/0.65 x20P □-G-◇-TIS=VVR |
11 | 4/0.65 | 1.57 | 0.6 | 2.77 | 5.54 | 24.4 | 0.1 | 2.0 | 29.4 | 1,000 | 1080 |
| 2.3 | 7/0.65 x2P □-G-◇-TIS=VVT |
1 | 7/0.65 | 1.95 | 0.6 | 3.15 | 注 | 注 7.6 | 0.1 | 1.0 | 10.6 | 1,000 | 225 |
| 2.3 | 7/0.65 x3P □-G-◇-TIS=VVR |
2 | 7/0.65 | 1.95 | 0.6 | 3.15 | 6.3 | 11.3 | 0.1 | 1.6 | 15.5 | 1,000 | 345 |
| 2.3 | 7/0.65 x4P □-G-◇-TIS=VVR |
3 | 7/0.65 | 1.95 | 0.6 | 3.15 | 6.3 | 12.9 | 0.1 | 1.6 | 17.1 | 1,000 | 410 |
| 2.3 | 7/0.65 x5P □-G-◇-TIS=VVR |
4 | 7/0.65 | 1.95 | 0.6 | 3.15 | 6.3 | 14.5 | 0.1 | 1.6 | 18.7 | 1,000 | 490 |
| 2.3 | 7/0.65 x6P □-G-◇-TIS=VVR |
5 | 7/0.65 | 1.95 | 0.6 | 3.15 | 6.3 | 16.4 | 0.1 | 1.8 | 21.0 | 1,000 | 590 |
| 2.3 | 7/0.65 x7P □-G-◇-TIS=VVT |
6 | 7/0.65 | 1.95 | 0.6 | 3.15 | 6.3 | 16.4 | 0.1 | 1.8 | 21.0 | 1,000 | 650 |
| 2.3 | 7/0.65 x8P □-G-◇-TIS=VVR |
7 | 7/0.65 | 1.95 | 0.6 | 3.15 | 6.3 | 18.9 | 0.1 | 1.8 | 23.5 | 1,000 | 730 |
| 2.3 | 7/0.65 x10P □-G-◇-TIS=VVT |
8 | 7/0.65 | 1.95 | 0.6 | 3.15 | 6.3 | 20.2 | 0.1 | 2.0 | 25.2 | 1,000 | 910 |
| 2.3 | 7/0.65 x12P □-G-◇-TIS=VVT |
9 | 7/0.65 | 1.95 | 0.6 | 3.15 | 6.3 | 21.7 | 0.1 | 2.0 | 26.7 | 1,000 | 1030 |
| 2.3 | 7/0.65 x15P □-G-◇-TIS=VVT |
10 | 7/0.65 | 1.95 | 0.6 | 3.15 | 6.3 | 23.9 | 0.1 | 2.0 | 28.9 | 1,000 | 1230 |
| 2.3 | 7/0.65 x20P □-G-◇-TIS=VVR |
11 | 7/0.65 | 1.95 | 0.6 | 3.15 | 6.3 | 27.7 | 0.1 | 2.0 | 32.7 | 1,000 | 1550 |
Note: For 2 pairs only, four cable cores are simply twisted. For this reason, “Pair Outside diameter” is not shown for them. “Twisted multi pairs Outside diameter” indicates the outside diameter of twisted four cable cores.
When placing an order, please replace each of the □ symbols with the type and tolerance class of the appropriate extension and compensating cable for thermocouples (see Table 1), and each of the ◇ symbols with its identification code (see Table 2).
When placing an order, please replace each of the □ symbols with the type and tolerance class of the appropriate extension and compensating cable for thermocouples (see Table 1), and each of the ◇ symbols with its identification code (see Table 2).
The estimated weights represent calculated values for reference purposes, which do not include the weight of the drum.
*Please feel free to contact our Sales Department for custom-made products not listed above.